HP dv6 Benutzerhandbuch
3.
Remove the speakers (3).
Reverse this procedure to install the speakers.
Optical drive connector board
NOTE:
The optical drive connector board and cable are included in the Cable Kit, spare part number
603680-001.
Before removing the optical drive connector board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
), and then remove the following components:
b. Optical drive (see
)
c.
Keyboard (see
d. Top cover (see
e. Display assembly (see
)
f.
System board (see
Component replacement procedures
87