E F Johnson Company 2425372 Benutzerhandbuch
Draft
December 2006
5300 ES Series Mobile Radio Operating Manual -3
4.2
Time-Out Timer
The time-out timer disables the transmitter if it is keyed for longer than the programmed
time. It can be programmed on each channel for times of 15 seconds to 3 minutes, 45
seconds or it can be disabled.
time. It can be programmed on each channel for times of 15 seconds to 3 minutes, 45
seconds or it can be disabled.
If the transmitter is keyed continuously for longer than the programmed time, the
transmitter is disabled, a continuous tone sounds, and “TX TIMEOUT” is displayed. Five
seconds before time-out occurs, a warning beep sounds to indicate that time-out is
approaching. The timer and tone are reset by releasing the PTT switch.
transmitter is disabled, a continuous tone sounds, and “TX TIMEOUT” is displayed. Five
seconds before time-out occurs, a warning beep sounds to indicate that time-out is
approaching. The timer and tone are reset by releasing the PTT switch.
A different time can be programmed for each system, and the timer can be enabled or
disabled on each conventional channel. With conventional channels, a penalty time can
also be programmed that prevents further transmissions for a certain time after the
transmitter is disabled (see Section 5.5).
disabled on each conventional channel. With conventional channels, a penalty time can
also be programmed that prevents further transmissions for a certain time after the
transmitter is disabled (see Section 5.5).
One use of this feature is to prevent a channel from being kept busy for an extended period
by an accidentally keyed transmitter. It can also prevent possible transmitter damage
caused by transmitting for an excessively long period.
by an accidentally keyed transmitter. It can also prevent possible transmitter damage
caused by transmitting for an excessively long period.
SCN ED
Scan Edit Select
X
X
X
X
SN LST
Scan List Select
X
X
X
PW CHG
Set User Password
X
X
X
X
SQ LIST
Squelch Select List
X
LOCK
Site Lock Select
X
X
SEARCH
Site Search Select
X
X
STATUS
Status Select
X
X
X
X
SURVLC
Surveillance Mode Select
X
X
X
X
TN VOL
Tone Volume Select
X
X
X
X
CALL
Unit Call Select
X
X
(Blank)
Unprogrammed (not used)
X
X
X
X
-
Table 4.1 Programmable Option Switch Functions
Suggested
Key Label
Function
Available in Mode:
See
Descript.
in Section:
Conv.
Proj 25 Trk SMARTNET SmartZone