Nihon Kohden Corporation ZM-541PAA Benutzerhandbuch
96
ZM-540PA, ZM-541PA Operator’s Manual
WARNING
When not monitoring SpO
2
, disconnect the SpO
2
cable from the transmitter. Otherwise, noise from
the probe sensor may interfere and incorrect data
is displayed on the screen.
the probe sensor may interfere and incorrect data
is displayed on the screen.
Turn off the power of mobile phones, small
wireless devices and other devices which produce
strong electromagnetic interference around a
patient (except for devices allowed by the hospital
administrator). Radio waves from devices such as
mobile phones or small wireless devices may be
mistaken as pulse waves or respiration waves and
the displayed data may be incorrect.
wireless devices and other devices which produce
strong electromagnetic interference around a
patient (except for devices allowed by the hospital
administrator). Radio waves from devices such as
mobile phones or small wireless devices may be
mistaken as pulse waves or respiration waves and
the displayed data may be incorrect.
CAUTION
Handle the probe cable according to the following
cautions. Failure to follow these cautions may
cause cable discontinuity or short circuit of the
probe cable which may cause incorrect
measurement data or inability to perform
measurement. Also in rare cases, the probe
temperature may increase and cause skin burn on
the patient. If the probe cable is damaged, replace
the probe with a new one.
'RQRWSXOORUEHQGWKHSUREHFDEOH
'RQRWOHWFDVWHUIHHWUXQRYHUWKHSUREHFDEOH
cautions. Failure to follow these cautions may
cause cable discontinuity or short circuit of the
probe cable which may cause incorrect
measurement data or inability to perform
measurement. Also in rare cases, the probe
temperature may increase and cause skin burn on
the patient. If the probe cable is damaged, replace
the probe with a new one.
'RQRWSXOORUEHQGWKHSUREHFDEOH
'RQRWOHWFDVWHUIHHWUXQRYHUWKHSUREHFDEOH
CAUTION
Normal external light does not affect monitoring but
strong light such as a surgical light or sunlight may
affect monitoring. If affected, cover the measuring
site with a blanket.
strong light such as a surgical light or sunlight may
affect monitoring. If affected, cover the measuring
site with a blanket.
CAUTION