Fairchild CAM/CMOS-2K.LS Benutzerhandbuch

This command will show you the current software version in your camera. 

The camera returns………………...FPGA REV.2.5  The current value may be different 
 

Micro rev. 0.90 

Prod rev. A 1.01 

This command allows you to set line rate, enter value and enter. 

The range for line rate should be 204 – 38610. 

This command allows you to Calibrate Pixel Offset.  You can observe this command by the 
blinking green/amber LED.  When the LED stops blinking, that means that the calibration of the 
pixels is completed. 

This command allows you to Calibrate Pixel Gain.  We strongly recommend that this command 
be done after each CPO.  To perform this operation correctly the camera must look at a 
uniform illuminated light source.  The LED will be a blinking amber/red. 

This command reads the different component voltages located within the camera. 

 

The camera returns…………………INPUT = 6.103 

 

 

  3.9VD 

= 

3.225 

 

 

  3.4VS 

= 

3.448 

 

 

  1.5VD 

= 

1.495 

 

 

  1VAD2 

= 

0.980 

 

 

  1VAD 

= 

0.980 

This command reads the internal camera temperature. 

 

The camera returns…………………Temp 39.42

°C (example) 

This command allows you to set the integration time. 

 

Set line rate first (SLR) before using this command. 

 

Enter value plus enter value in microseconds, Range is 20 – 4900. 

 

Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manual • Rev C• 15 of 42