Avaya 03-300430 User Manual

1125

ABRT

Ethernet link not in service.

1. Verify Ethernet link is in service (status port location or 

status link n).

2. If the link is not in service, release the link using (release link n or 

release port location).

3. Repeat the test.

4. Escalate if the problem persists.

2000

ABRT

Did not receive circuit pack test response within the allowable time period.

1. Reset the circuit pack (busyout board location, reset board 

location, and release board location).

2. If the test fails again, replace the circuit pack.

2012

ABRT

Internal system error.

1. Retry the command at 1-minute intervals, up to 3 times.

2. Escalate if the problem persists.

2100

ABRT

Could not locate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals, up to 5 times.

2. Escalate if the problem persists.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals, up to 3 times.

2. Escalate if the problem persists.

1003

FAIL

Ping to the destination failed due to on-board problem.

1. Retry the command at 1-minute intervals, up to 3 times.

2. If the problem persists, reset the circuit pack (busyout board 

location, reset board location, and release board 
location).

3. If the problem persists, re-administer the Ethernet connection through 

a different Ethernet port, if available.

4. If the problem still persists, or if there are no other available Ethernet 

ports, replace the circuit pack.

 2 of 3