Avaya 03-300430 User Manual

1125

ABRT

Ethernet link not in service.

1. Verify whether Ethernet link is in service (status port location 

or status link n).

2. If the Ethernet link is not in service, release the link (release link 

n or release port location).

3. Repeat the test.

4. Escalate if the problem persists.

1959

ABRT

Downlink message error.

1. Retry the command at 1-minute intervals, up to 3 times.

2. Escalate if the problem persists.

2012

ABRT

Internal system error.

1. Retry the command at 1-minute intervals, up to 3 times.

2. Escalate if the problem persists.

2100

ABRT

Could not locate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals, up to 5 times.

2. Escalate if the problem persists.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals, up to 3 times.

2. Escalate if the problem persists.

FAIL

Link integrity lost due to problem with attachment of Ethernet cable to the 
port.

1. Repeat the test.

2. If the test fails, verify that the cable properly is secured to Ethernet port 

and to the bus.

3. Verify the C-LAN circuit pack’s link integrity LED is glowing.

4. Retry the test.

5. If problem persists, see Ethernet Local Loop-around test (#1278) 

repair procedures.

PASS

The Ethernet Link Integrity test (#1282) detects good connections.

 2 of 2