Avaya 03-300430 User Manual

2. Run test led switch-node for each administered switch node carrier (SNC), and verify 

that the LEDs on the correct SNC are lit.

If not, check the connectivity to the SNC that does not light the LEDs as expected.

2100

ABRT

Could not allocate the necessary system resources to run this test for 
endpoint 1 of the fiber link. 

1. Use list fiber-link to display a fiber link’s endpoints. 
2. If this fiber link has two SNI endpoints, run test board location 

separately for each SNI and follow the repair procedures in section 
SNI-BD.

2300

ABRT

The downlink message necessary to run this test could not be sent. 

1. Use list fiber-link to display fiber link endpoints.
2. If this fiber link has two SNI endpoints, run test board location 

separately for each SNI and follow the repair procedures in section 
SNI-BD. 

2301

ABRT

The software timer could not be set before sending the downlink message 
necessary to run this test. 

1. Use list fiber-link to display fiber link endpoints.
2. If this fiber link has two SNI endpoints, run test board location 

separately for each SNI and follow the repair procedures in section 
SNI-BD. 

 1 of 22