Avaya 03-300430 User Manual

209

FAIL

The SNI circuit pack (Endpoint 2) cannot communicate with the equipped 
SNI in slot 9. Use list fiber-link to see a fiber link’s endpoints.

1. Perform the 

 in 

 in Maintenance Procedures (03-300192). This should 

resolve multiple SNI-PEER errors.

2. If the SNI being tested has SNI-PEER Error Type 1793, replace the 

SNI being tested. (Replacing an SNI may be service interrupting. 
Refer to the SNI-BD section for the procedure to replace an SNI.) To 
view SNI-PEER errors, use display errors with category 

PNC-PEER. Retry the command.

3. If the SNI being tested still has SNI-PEER Error Type 1793, replace 

the SNI in slot 9.

212

FAIL

The SNI circuit pack (Endpoint 2) cannot communicate with the active 
SNC. Use list fiber-link to see a fiber link’s endpoints.

1. Check the error log for other SNI circuit packs in the same carrier with 

a 257 SNI-BD error. Use display errors with category PNC to 

view SNI-BD errors. If other SNI circuit packs in the same switch node 
carrier have error 257, then replace the active SNC in this switch node 
carrier. Replacing an SNC may be service interrupting. Refer to the 
SNC-BD section for the procedure for replacing an SNC.

2. Replace this SNI.

3. Replace the active SNC in the same switch node carrier.

213

FAIL

The SNI circuit pack (Endpoint 2) cannot communicate with the equipped 
SNI in slot 13. Use list fiber-link to see a fiber link’s endpoints.

1. Perform the 

 in 

 in Maintenance Procedures (03-300192). This should 

resolve multiple SNI-PEER errors.

2. If the SNI being tested has SNI-PEER Error Type 2049, replace the 

SNI being tested. (Replacing an SNI may be service interrupting. 
Refer to the SNI-BD section for the procedure to replace an SNI.) To 
view SNI-PEER errors, use display errors with category 

PNC-PEER. Retry the command.

3. If the SNI being tested still has SNI-PEER Error Type 2049, replace 

the SNI in slot 13.

 16 of 22