Avaya 03-300430 User Manual

This nondestructive test runs due to in-line errors, during periodic and schedule maintenance, 
and on demand.

 

1412

ABRT

This test does not execute on a G700 media gateway.

2100

ABRT

Could not locate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals, up to 5 times.

2. Escalate if the problem persists.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals, up to 3 times.

2. Escalate if the problem persists.

1003

FAIL

Ping to the destination failed.

1. Retry the command at 1-minute intervals, up to 3 times.

2. Investigate any C-LAN Ethernet port errors.

1007

FAIL

The system could not PING the registered endpoint via the C-LAN.

1. Verify that at least one destination reachable through this port. PING this 

destination (ping ip-address xxx.xxx.xxx.xxx).

2. If the PING to any destination is successful through this port, the link is 

up.

3. If PING to every destination fails, test the C-LAN port (test port 

location short), and follow repair procedures for Session Status test 

(#1286) failures.

4. If only this station cannot be pinged:

●

Make sure the PC is up.

●

Make sure the PC has a network connection (Ethernet or dial-up).

●

Check the Ethernet cabling.

PASS

The system can successfully send IP packets to the registered endpoint from 

the C-LAN.