Avaya 03-300430 User Manual

1, 2, 3

FAIL

No response was received within the allowable time period on one of the 
transmissions to the terminal. This indicates a problem with the data link to 
the voice terminal. This could be a sleeping set problem or it may be due to 
wiring or an unplugged or defective set.

1. Check for errors in the error log, for example, error 1537.

2. Remotely enter busyout location and release location, and 

run the short test sequence on the port to check for other errors 
associated with the port or terminal.

3. Check the wiring to the set if it appears that the terminal is not 

responding to any tests; otherwise, replace the terminal and rerun the 
test.

4. If the test still fails, replace the circuit pack and reconnect the original 

terminal.

PASS

Hybrid Line Remote Digital Looparound test passed. The hybrid circuit pack 
is sending and receiving proper messages to and from the voice terminal.

1. If problems still exist, investigate using other circuit pack tests and by 

examining the station, wiring, and connections.

0

NO 

BOARD

The test could not relate the internal ID to the port (no board). This could be 
due to incorrect translations, no board is inserted, an incorrect board is 
inserted, or an insane board is inserted.

1. Check to ensure that the board translations are correct. Enter 

list config, and resolve any problems that are found.

2. If the board was found to be correctly inserted in step 1, enter busyout 

3. Enter reset board location
4. Enter release board location
5. Enter test board location long 

This should re-establish the linkage between the internal ID and the port. If 

this is not the case, dispatch to check to ensure that there is a valid board 

inserted.

 2 of 2