Avaya 03-300430 User Manual

For logged failures reseat the board to run the test again. If the board still fails, replace the 
board.

This test is nondestructive.
This test attempts to verify IP network connectivity between one pair of IP Media Resources that 
are connected to a customer’s LAN/WAN IP network.
This test creates a G.711 audio path between the source IP Media Resource specified in the 
command line and a destination IP Media Resource. The destination Media Resource is chosen 
by the system. The destination Media Resource is chosen from a port network other than the 
port network containing the source Media Resource. In addition, the destination Media 
Resource is chosen from the same IP network region as the source Media Resource or is 
chosen from an IP network region that is administered to be connected to the IP network region 
of the source Media Resource.

20481

Field Programmable Gate Array (FPGA) not functioning 

properly. 

No

20482

Super NPE failed FIFO test

No

20483

Unable to start VoIP engine

No

20484

Digital Signal Processors (DSP) not functioning properly

No

20485

Bad initialization on network interface

No

20486

Bad services port - log error only, no alarm

Yes

20487

Packet bus driver interface not functioning properly

No

20488

Network interface 1 not working

No

20489

Network interface 2 not working - log error only, no alarm

Yes

20490

Virtual Network interface not functioning properly

No

20491

Angel interface not functioning properly

No

20492

Spitfire driver not functioning properly

No

20493

Packet bus hardware interface not functioning properly

No