Avaya 03-300430 User Manual

1015

ABRT

The port is not in the out-of-service state. Use busyout port location 

to place it in the out-of-service state and repeat this test.

CAUTION:

The busyout prevents new call originations on every B 

channel in the signaling group until the port is released.

1139

ABRT

This port network’s packet bus is out of service.

1. Follow repair procedures for the packet bus.

2. Enter test port location long, and check results of this test 

(#939).

1141

ABRT

The Packet Interface circuit pack is out of service.

3. Follow repair procedures for PKT-INT.

4. Enter test port location long, and check results of this test 

(#939).

 /

:

1412

ABRT

This test does not execute on a G700 media gateway.

2012

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

FAIL

The Loop-Back Test has failed.

1. If the test fails repeatedly, attempt to reset the circuit pack when the 

other ports on the board are idle. Reset the circuit pack by entering 
busyout board location and reset board location.

2. Repeat the test and, if it continues to fail, replace the circuit pack.

PASS

Connectivity of the D channel over the packet bus is operational.