Avaya 03-300430 User Manual

1113

ABRT

The signaling channel is down. Therefore, no messages can be sent to the 
far-end switch or terminal adapter.

1. Examine the results of Tests #636 and #639 and follow 

recommendations provided there.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2500

or

none

ABRT

Internal system error or administration problem

1. Determine whether any B channels are administered. If not, then this is 

a normal ABORT, since this test cannot run unless at least one B 
channel is administered. If at least one B channel is administered, there 
is an internal system error. Retry the command at 1-minute intervals up 
to 5 times.

FAIL

Internal system error. See description of ABORT with error code 2500.

PASS

A message was composed and sent to the far-end switch or terminal 
adapter. The ISDN PRI specification allows up to 2 minutes for a reply.

1.  Check the Error Log for 

page 1429 for errors of type 2305 for evidence of a Remote Layer 3 
Query failure. If no new errors were logged since this test was run, then 
this switch and the far-end switch or terminal adapter can exchange call 
control messages. 

2. If there is still a problem with a particular ISDN trunk or PRI endpoint, 

busyout the trunk and run the long test sequence, paying particular 
attention to the results of Test #258 (ISDN Test Call).

 2 of 3