Avaya 03-300430 User Manual

Any

NO 

BOARD

The test could not relate the internal ID to the port (no board). This could be 

due to incorrect translations, no board is inserted, an incorrect board is 

inserted, or an insane board is inserted.
Ensure that the board translations are correct. Execute add ds1 location 

to administer the circuit pack or media module interface if it is not already 

administered.
If the board was already administered correctly, check the error log to 

determine whether the board is hyperactive. If this is the case, the board is 

shut down. Reseating the board will re-initialize the board.
If the board was found to be correctly inserted in step 1, then enter busyout 

board location.

Enter reset board location.

Enter release location board.

Enter test board location long.

This should re-establish the linkage between the internal ID and the port.

 3 of 3