Avaya 03-300430 User Manual

p. Error Type 3840: is not service-affecting. No action is required.

These errors are reported by the Media Module when it receives a bad control channel 
message from the switch. The Aux Data identifies the following error events:

q. Error Type 3841: The MG-DS1 (MM710) has detected a transient hardware logic error (for 

example, program logic inconsistency).

This error will disappear when no faults are detected for 100 minutes.

r. Error Type 3842 is a Bad Translation RAM Location Found Error.

This error is not service-affecting. No action is required. A Bad Translation RAM is detected, 
but the call continues by using another translation location.

s. Error Type 3999: the Media Module sent a large number of control channel messages to 

the switch within a short period of time. 

If Error Type 1538 is also present, then the Media Module was taken out-of-service due to 
hyperactivity. If Error Type 1538 is not present, then the Media Module has not been taken 
out-of-service, but it has generated 50% of the messages necessary to be considered 
hyperactive. This may be completely normal during heavy traffic periods. However, if this 
error type is logged when the Media Module is being lightly used, it may indicate a problem 
with the Media Module or the equipment attached to it.

4096

Bad major heading

4097

Bad port number

4098

Bad data

4099

Bad sub-qualifier

4100

State inconsistency

4101

Bad logical link