Avaya 03-300430 User Manual

 1180

ABRT

A Maintenance/Test board’s digital port could not be allocated for this test. 
Since this error more closely relates to the digital ports on the specific 
Maintenance/Test board used than to the TN758 Pooled Modem circuit 
pack itself, any hardware testing or replacement activities will focus on 
the Maintenance/Test board.

1. Use list config to verify the presence of both digital ports (ports 

02 and 03) on the Maintenance/Test board. The display should show 
entries for both.

2. If the ports are absent, see 

on page 1705.

3. If the ports are present, retry the command at 1-minute intervals up to 

5 times.

1181

ABRT

No time-slots available to connect digital ports for the test.

1. Retry the command at 1-minute intervals up to 5 times.

1182

ABRT

Internal system error. Failed to connect the digital ports with time-slots.

1. Retry the command at 1-minute intervals up to 5 times.

1340

ABRT

No Maintenance/Test digital port is currently available to perform this test.

1. Use list config to determine whether any Maintenance/Test 

digital ports (ports 02 and 03 on the Maintenance/Test circuit pack) 
are present in the system. Because at least one Maintenance/Test 
circuit pack must always be present in the a PN of any Multi-Connect 
configuration, there should be at least two such ports present. If the 
ports are present, proceed to step 2. Otherwise, determine why no 
ports appear in the list config display.

2. If the ports are present and no errors are logged against them, retry 

the command at 1-minute intervals up to 5 times.

3. If the test continues to abort, replace the Maintenance/Test circuit 

pack.

2004

ABRT

Off-Hook was not received from the Pooled Modem.

1. Busyout the digital port being tested on the Pooled Modem circuit 

pack. Retry the command at 1-minute intervals up to 5 times.

2. If the test still aborts, replace the circuit pack.

 2 of 6