Avaya 03-300430 User Manual

2000

ABRT

The test was aborted because response to the test was not received 
within the allowable time period.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test aborts with Error Code 2000 again, run short test 

sequence on the associated DS1-BD or UDS1-BD. If tests 138 
through 145 on the associated DS1-BD or UDS1-BD are also 
aborting with Error Code 2000, hyperactivity on the board or facility 
is indicated. In this case, the hyperactivity problem should be dealt 
with first.

2012

ABRT

The test was aborted due to a system error.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

1

FAIL

Internal system error.

1. Look for DS1-BD/UDS1-BD errors in the Hardware Error Log. If 

2. If a channel multiplexer is used as the remote DS1 endpoint to 

which the station connects, refer to the multiplexer vendor’s 
maintenance document for diagnosis.

3. Retry the command at 1-minute intervals up to 5 times.

PASS

The station hook states in both switch software and DS1 Interface circuit 

pack are consistent.

 2 of 3