Avaya 03-300430 User Manual

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2020

ABRT

The test did not run due to a previously existing error on the specific port 
or a more general circuit pack error.

1. Examine Error Log for existing errors against this port or the circuit 

pack and attempt to diagnose the previously existing error.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2500

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to 5 times.

1, 2

FAIL

The NPE of the tested port was found to be transmitting in Error Log. 
This will cause noisy and unreliable connections. Failure code 1 indicates 
that the Crosstalk test failed on the primary channel. Failure code 2 
indicates that the Crosstalk test failed on the secondary channel.

1. Replace the circuit pack.

PASS

The port is correctly using its allocated time slots.

1. To be sure that this is not an intermittent problem, repeat this test up 

to up to 10 times and verify that it continues to pass.

2. If complaints still exist, examine the data module, connections, and 

wiring.

 3 of 3