Avaya 03-300430 User Manual

1001

ABRT

System resources required to run this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

1002

ABRT

The system could not allocate time slots for the test. The system may be 
under heavy traffic conditions or it may have time slots out-of-service due 
to TDM-BUS errors.

1. If the system has no TDM-BUS errors and is not handling heavy 

traffic, repeat the test at 1-minute intervals up to 5 times.

1003

ABRT

The system could not allocate a tone receiver for the test. The system 
may be oversized for the number of tone detectors present or some tone 
detectors may be out-of-service.

1. Resolve any TTR-LEV errors.

2. Resolve any TONE-PT errors.

3. If neither condition exists, retry the command at 1-minute intervals up 

to 5 times.

1004

ABRT

The port was seized by a valid call during the test. The test has been 
aborted.

1. Use display port location to determine the data module 

extension. Use status data module with the extension number to 

determine the service state of the data module. If the data module is 
in use, wait until the port is idle before retesting.

:

1412

ABRT

This test does not execute on a G700 media gateway.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

:2001

ABRT

System resources required to run this test are not available.

1. Retry the test at one-minute intervals a maximum of 5 times.

2100

ABRT

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

2500

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to 5 times.

 2 of 3