Avaya 03-300430 User Manual

Page of 2574
SYS-LINK (System Links)
Issue 1 June 2005
2175
 
SYS-LINK (System Links)
S8700 | 8710
 / 
S8500
System links are packet links that originate at the Packet Interface board and traverse various 
hardware components to specific endpoints. The hardware components involved on the forward 
and reverse routes can be different, depending upon the configuration and switch 
administration. Various types of links are defined by their endpoints:
Recording System Link Events
The system-links MO records every error encountered on the links. Most of these events are not 
extraordinary unless they occur with an alarming frequency. The events are logged as they 
occur, leaving a “trail” to help analyze abnormal behavior exhibited by the endpoints attached to 
the links or the links themselves.
When a link goes down, an alarm is raised immediately. For EAL, INL, BFDL, and PACL link 
types a MINOR alarm is raised. For every other link type a WRN alarm is raised. Other alarming 
conditions that do not cause the link to go down get a WRN alarm, regardless of the link type.
MO Name
Alarm Level
Initial SAT Command to Run
Full Name of MO
SYS-LINK
MIN
test sys-link location
SYSTEM LINKS
SYS-LINK
WRN
test sys-link location
SYSTEM LINKS
EAL
Expansion Archangel Link terminating at an Expansion Interface board. This 
link carries CCMS messages.
INL
Indirect Neighbor Link terminating at a Switch Node Interface board.
PACL
PNC ATM Control Link terminating at a PNC ATM-EI board. This link carries 
ATM signaling commands from CAPro to the remote TN2238 (ATM-EI) boards.
PRI
ISDN-PRI D-Channel Link terminating at a Universal DS1 board
RSCL
Remote Socket Control Link terminating at a C-LAN board
RSL
Remote Socket Link terminating at a C-LAN board
BFDL
Bearer Fault Detection Link terminating at an Expansion Interface board. This 
link provides inter-port-network bearer fault detection for port-networks that do 
not use an EAL terminating at the EI board. 
MBL
Maintenance Board Link terminating at an IPSI board that provides 
Environmental maintenance for a G650 rack mounted cabinet. This replaces 
the Expansion Port-Network (EPN) maintenance board serial channel. 
TACL
ATM control link terminating at an ATM-TRK board. This link carries ATM 
signaling commands from CAPro to the remote TN??? (ATM-TRK) boards.