Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
2374 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
UDS1-BD (UDS1 Interface Circuit Pack)
S8700 | 8710
 / 
S8500
Note:
Note:
G700
: The separate, but equivalent, MG-DS1 MO can reside in slots 1–4 of a 
G700 Media Gateway.
The UDS1 Interface circuit pack provides an interface to the DS1 facility.
The maintenance strategy for the TN464 UDS1 Interface circuit pack (UDS1-BD) is very similar 
to the maintenance strategy for the TN767 DS1 Interface circuit pack (DS1-BD). The same 
commands are used for administering and testing the boards. The differences in maintenance 
strategy between the boards are due to the UDS1 circuit pack’s direct interface to the Packet 
bus which is used for ISDN-PRI signaling (ISDN-LNK). While both the TN464 and TN767 can 
support ISDN-PRI B channels, ISDN-PRI D-channel signaling applications require a TN464 
UDS1 circuit pack. See the following table for a list of USD1 Interface circuit packs:
Note:
Note:
For information about other DS1 circuit packs, see 
The UDS1 maintenance strategy includes logging in-line errors reported by the UDS1 Interface 
circuit pack, running tests for error diagnosis and recovery, and raising or clearing maintenance 
alarms.
MO Name
Alarm Level
Initial SAT Command to Run
Full Name of MO
UDS1-BD
MAJ
test board location sh
UDS1 Interface Circuit Pack
UDS1-BD
MIN
test board location l
UDS1 Interface Circuit Pack
UDS1-BD
WRN
test board location sh
UDS1 Interface Circuit Pack
Circuit Pack
 Code
24-
Channel
32-
Channel
Tie Trunk 
Signaling
CO Trunk
 Signaling
DID Trunk
 Signaling
OPS Line
 Signaling
TN2242
X
X
X
TN464C/D/E/F
TN464GP
X
X
X
X
X
X
(24-chl only)
TN2464
X
X
X
X
X
X