Avaya 03-300430 User Manual

1002

ABRT

No TDM bus timeslots available for the test.

1. Retry the command at 1-minute intervals up to 5 times.

2. Escalate if the problem persists.

:

1412

ABRT

 On the G700, this test aborts with Error Code 1412.

1963

ABRT

The port is in use.

1. Retry the command when the port is idle. You can force the port to the 

idle state with busyout port location.
Note: This command is destructive, tearing down every call and link 
using the port.

2000

ABRT

Did not receive circuit pack test response within the allowable time period.

●

If this problem persists, reset the circuit pack (busyout board 
location, reset board location, and release board 
location).

●

If the problem persists, replace the circuit pack.

2012

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 3 times.

2. Escalate if the problem persists.

2100

ABRT

Could not allocate the necessary system resources to run test.

1. Retry the command at 1-minute intervals up to 5 times.

2. Escalate if the problem persists.

FAIL

VAL circuit pack detected test failure.

●

If the problem persists, reset the circuit pack (busyout board 
location, reset board location, and release board 
location).

●

If the problem persists, replace the circuit pack.

PASS

Port circuitry functioning properly.

 2 of 2