Avaya 03-300430 User Manual

 1000

ABRT

System resources required to run this test are not available. The port may 
be busy with a valid call. Use display port location to determine the 

station extension, attendant number, or trunk group/member number of the 
port. Use status station, status attendant, or status trunk to 

determine the service state of the port. If the service state indicates that the 
port is in use, then the port is unavailable for certain tests. You must wait 
until the port is idle before retesting. Attendants are always in use 
(off-hook) if the handset is plugged in and the port is not busied out.

1. If the port status is idle, then retry the command at 1-minute intervals a 

maximum of 5 times.

1004

ABRT

The port received an EXT-DEV failure during the test. The test has been 
aborted.

1. Before retesting, enter test external-device-alarm port 

location to determine whether the port is reporting an EXT-DEV 

failure.

2. If the port has no EXT-DEV failures, retry the command at 1-minute 

intervals up to 5 times.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary system resources to run this test. This 
could be due to a failure to seize the port.

1. Retry the command at 1-minute intervals up to 5 times.

FAIL

The port’s battery feed chip is unable to supply sufficient power to sense 
the external device alarm. This may occur when the test is performed at 
the same time that the external device contact closure occurs.

1. Before retesting, enter test external-device-alarm port 

location to determine whether the port is reporting an EXT-DEV 

failure. Wait until the port has no EXT-DEV failures before retesting.

2. Retry the command at 1-minute intervals up to 5 times.

PASS

The port’s battery feed chip is able to provide power to the external device 

alarm to detect contact closure.

 2 of 3