Avaya 03-300430 User Manual

The battery feed chip provides power to the telephone equipment, signaling, rotary dial pulsing, 
transmission, and balance.  This test checks the signaling and switchhook capabilities of the 
battery feed chip by terminating the port, applying battery power, and detecting the resulting 
current.

ABRT

Necessary system resources could not be allocated to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1000

ABRT

System resources are unavailable.  The port may be busy with a valid call.  
This result is also reported for the system’s Music-On-Hold port when it is 
off-hook, which it usually is.

1. Enter display port location to determine the station’s 

extension.

2. Enter status station extension to determine the service state of 

the port.

3. If the port is active, wait until it is idle.  Retry the command at 1-minute 

intervals up to 5 times.

4. If the test continues to abort, escalate the problem.

1004

ABRT

A valid call seized the port during the test and aborted the test.

1. Use display port location to determine the station extension.
2. Use status station extension to determine the service state of 

the port.

3. If the port is active, wait until it is idle before testing.  Retry the 

command at 1-minute intervals up to 5 times.

4. If the test continues to abort, escalate the problem.

1005

ABRT

This test was aborted due to a configuration problem.  The test is not 

applicable for this type of analog port.  This error can be ignored.

 1 of 3