Avaya 03-300430 User Manual

1018

ABRT

The test was disabled via translation.  You may want to determine why the 
test has been disabled before you enable it.

1. Verify that the Maintenance Test field on the Trunk Administration 

form is set to n. To enable the test, change the trunk administration and 
enter y into the Maintenance Test field.

2. Repeat the test.

1020

ABRT

The test did not run due to a previously existing error on the specific port or 
a more general circuit pack error.

1. Examine Error Log for existing errors against this port or the circuit 

pack and attempt to diagnose the previously existing error.

1412

ABRT

This test does not execute on a G700/G350 Media Gateway.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

2053

ABRT

At least one of the following errors was found on the DS1 circuit pack:  Loss 

of signal (1281), Blue alarm (1793), Red alarm (2049), Yellow alarm (2305), 

or Hyperactivity (1537).
Look for the previous error types in the Hardware Error Log, and follow the 

procedures given in the appropriate DS1-BD or UDS1-BD maintenance 

documentation for the listed error types.

 2 of 4