Nilfisk Alto 30 M User Manual

24

ATTIX 30/50 H/M

english

During the following work, ensure 
that dust is not unnecessarily 
spread around, Wear a P2 breath-
ing mask.

Never use the vacuum cleaner 
without a filter.

1.  Switch  off  the  vacuum 

cleaner  and  pull  the  mains 
plug out of the socket.

2.  Open  the  retaining  clamps 

(A)  and  remove  the  up-
per  section  of  the  vacuum 
cleaner.

Removing the filter element:
3.  Turn the filter holder anticlo-

ckwise and remove it .

4.  Carefully  remove  the  filter 

element.

5.  Clean  the  filter  seal  (B). 

Check it for damage and re-
place it if necessary.

Inserting the filter element:
6.  Fit the filter holder and turn 

it clockwise to secure it.

7.  Dispose  of  the  used  fil-

ter  element  in  accord-
ance  with  legal  regulations. 
 
 
 

8.  Attach  the  upper  section  of 

the vacuum cleaner.

9.  Close  the  retaining  clamps 

(A).  Ensure  that  the  retain-
ing clamps fit properly.

11. Attach  the  upper  section  of 

the vacuum cleaner.

12. Close  the  retaining  clamps 

(A). Ensure that the retaining 
clamps fit properly.