Xantrex Technology 10 User Manual

Installation

2–2

975-0251-01-01

The Freedom 10 is provided with integral electronic 

protection against AC and DC overloads.

The Freedom 10 is appropriate for installation in recreational vehicle (RV), 
residential solar installations, and marine applications. The installation 
instructions for each application will be discussed separately. Refer to the separate 
installation guide for typical installation examples.

This equipment is not ignition protected and employs components that tend to produce 
arcs or sparks. To reduce the risk of fire or explosions, do not install in compartments 
containing batteries or flammable materials or areas in which ignition-protected 
equipment is required.

To reduce the risk of electric shock and prevent premature failure due to corrosion, do not 
mount where exposed to rain or spray.

To prevent fire, do not obstruct ventilation openings. Do not mount in a zero clearance 
compartment—overheating may result.

For continued protection against risk of electric shock use only the residual current circuit 
breaker (RCCB) type receptacles. Other types may fail to operate properly when 
connected to this inverter, resulting in a potential shock hazard.

Both AC and DC voltage sources are teminated inside this equipment.
Each circuit must be individually opened before servicing. When a solar array is exposed 
to light it supplies DC voltage to the battery and this equipment.

Do not remove cover—no user serviceable parts inside. Refer servicing to qualified 
service personnel.

The output of this device is not sinusoidal. It has a maximum total 

harmonic distortion of 47% and a maximum single harmonic of 34%.