Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         29 

When you log in to the switch, the CLI will start with Privileged EXEC View mode that is a 
read-only mode. In this mode, you can see a system configuration and information with 
several commands. 

Tab. 3.1 shows main command of Privileged EXEC View mode. 

Opens Privileged EXEC Enable mode. 

Logs out the switch. 

Shows a system configuration and information. 

Main Commands of Privileged EXEC View Mode 

 

To configure the switch, you need to open Privileged EXEC Enable mode with the enable 
command, then the system prompt will changes from SWITCH> to SWITCH#. 

View Opens 

 mode. 

 

You can set a password to Privileged EXEC Enable mode to enhance security. Once set-
ting a password, you should enter a configured password, when you open Privileged 
EXEC Enable

 mode. 

Tab. 3.2 shows main commands of Privileged EXEC Enable mode. 

Inputs time and date in system. 

Opens Configuration mode. 

Connects to another device through telnet. 

Configures the number of lines to be displayed in screen. 

Traces transmission path of packet. 

Finds users accessed to system through telnet. 

Main Commands of Privileged EXEC Enable Mode 

 

In Global Configuration mode, you can configure general functions of the system. You can 
also open another configuration mode from this mode. 

To open Global Configuration mode, enter the configure terminal command, and then 
the system prompt will be changed from SWITCH# to SWITCH(config)#. 

Enable 

Opens  Global Configuration mode from Privileged 

 mode.