Siemens S223 User Manual
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
30 A50010-Y3-C150-2-7619
Tab. 3.3 shows a couple of important main commands of Global Configuration mode.
Command Description
access-list
Configures policy to limit routing information on the standard of AS.
arp
Registers IP address and MAC address in ARP table.
bgp
Helps BGP configuration.
bridge
Opens Bridge Configuration mode.
copy
Makes a backup file for the configuration of the switch.
dot1x
Configures various functions of 802.1x daemon.
end
Closes current mode and returns to User EXEC mode.
exit
Closes current mode and returns to previous mode.
hostname
Changes host name of the switch.
exec-timeout
Configures auto-logout function.
fan
Configures fan operation
interface
Opens Interface Configuration mode.
ip
Configures various functions of the interface.
passwd
Changes a system password.
qos
Configures QoS.
restore factory-defaults
Restores the default configuration of the switch.
rmon-alarm
Opens Rmon-alarm configuration mode.
rmon-event
Opens Rmon-event configuration mode.
rmon-history
Opens Rmon-history configuration mode.
route-map
Opens Route-map Configuration mode.
router
Opens Router Configuration mode.(OSPF. RIP, VRRP, PIM, BGP)
snmp
Configures SNMP.
sntp
Configures SNTP
syslog
Configures syslog.
time-zone
Configures time zone.
Tab. 3.3
Main Commands of Global Configuration Mode
3.1.4 Bridge
Configuration Mode
In Bridge Configuration mode, you can configure various Layer 2 functions such as VLAN,
STP, LACP, EFM OAM, etc.
STP, LACP, EFM OAM, etc.
To open Bridge Configuration mode, enter the bridge command, then the system prompt
will be changed from SWITCH(config)# to SWITCH(bridge)#.
will be changed from SWITCH(config)# to SWITCH(bridge)#.
Command Mode
Description
bridge
Global Opens
Bridge Configuration
mode.