Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         31 

Tab. 3.4 shows a couple of main commands of Bridge Configuration mode. 

Configures the system for automatic rebooting 

Configures packet filtering of DHCP server. 

Configures ERP function 

Configures LACP function. 

Configures LLDP function 

Manages MAC address 

Configures mac-flood-guard. 

Configures mirroring function. 

Configures EFM-OAM protocol 

Sets port configuration 

Configures Spanning Tree Protocol 

Configures trunk-function. 

Configures VLAN function. 

Main Commands of Bridge Configuration Mode 

 

You can open Rule Configuration mode using the command, rule  NAME  create, on 
Global Configuration

 mode. 

If you open Rule Configuration mode, the system prompt is changed from 
SWITCH(config)# to SWITCH(config-rule[name])#. 

 NAME create Global 

Opens 

 mode. 

 

On the Rule Configuration mode, it is possible to configure the condition and operational 
method for the packets to which the rule function is applied. 

Tab. 3.5 shows a couple of important main commands of Rule Configuration mode. 

Configures rule configuration and applies it to the switch. 

Configures a packet condition by MAC address. 

Configures an operational condition which meets the packet condition.

Configures a packet condition by port number. 

Configures the priority for rule. 

Configures VLAN. 

Main Commands of Rule Configuration Mode