Siemens S223 User Manual
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
32 A50010-Y3-C150-2-7619
3.1.6 DHCP
Configuration
Mode
To open DHCP Configuration mode, use the command, ip dhcp pool POOL, on Global
Configuration
Configuration
mode as follow. Then the prompt is changed from SWITCH(config)# to
SWITCH(config-dhcp[POOL])#.
Command Mode
Description
ip dhcp pool
POOL Global
Opens
DHCP Configuration mode
to configure DHCP.
DHCP Configuration
mode is to configure range of IP address used in DHCP server,
group in subnet, and default gateway of subnet.
Command Description
default-router
Configures a default gateway of subnet.
dns-server
Configures DNS server.
range
Configures a range of IP address used in DHCP server.
subnet
Configures a subnet
Tab. 3.6
Main Commands of DHCP Configuration Mode
3.1.7
DHCP Option 82 Configuration Mode
To open DHCP Option 82 Configuration mode, use the command, ip dhcp option82, on
Global Configuration
Global Configuration
mode as follow. Then the prompt is changed from SWITCH(config)#
to SWITCH(config-opt82)#.
Command Mode
Description
ip dhcp option82
Global
Opens DHCP Option 82 Configuration mode for DHCP
option 82 configuration.
option 82 configuration.
On DHCP Option 82 Configuration mode, configure a range of IP address used in DHCP
server and designate the group in subnet and configure default gateway of the subnet.
Tab. 3.7 is the main commands of DHCP Option 82 Configuration mode of hiD 6615
S223/S323.
server and designate the group in subnet and configure default gateway of the subnet.
Tab. 3.7 is the main commands of DHCP Option 82 Configuration mode of hiD 6615
S223/S323.
Command Description
policy
Configures a rule for option 82 packet.
remote-id
Configures a remote ID.
system-remote-id
Configures the remote ID of the system.
system-circuit-id
Configures the circuit ID of the system.
Tab. 3.7
Main Commands of DHCP Option 82 Configuration Mode