ZyXEL Communications NWA3000-N User Manual
NWA3000-N Series User’s Guide
267
C
H A P T E R
2 1
Troubleshooting
21.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
potential problems are divided into the following categories.
•
•
•
•
•
21.2 Power, Hardware Connections, and LEDs
The NWA3000-N series AP does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor included with the NWA3000-N series
AP or a PoE power injector.
AP or a PoE power injector.
2
Make sure the power adaptor or PoE power injector is connected to the NWA3000-
N series AP and plugged in to an appropriate power source. Make sure the power
source is turned on.
N series AP and plugged in to an appropriate power source. Make sure the power
source is turned on.
3
Disconnect and re-connect the power adaptor or PoE power injector.
4
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
cables.
5
If none of these steps work, you may have faulty hardware and should contact
your NWA3000-N series AP vendor.
your NWA3000-N series AP vendor.