Panasonic TQBJ0349 User Manual

If you use the projector at high elevation (1 400 m to 

2 700 m), the [HIGH ALTITUDE MODE] setting needs 

to be [ON] to set the fan speed high.

The setting will change as follows each time 

 

z

◄► is pressed.

Select this when using in normal 

environment (less than 1 400 m 

above sea level)

Select this when using at high 

altitude (above 1 400 m and less 

than 2 700 m above sea level)

The loudness of fan noise depends on the [HIGH 

 

z

ALTITUDE MODE] setting.

The separately-sold Smoke Cut Filter cannot be used 

 

z

when the [HIGH ALTITUDE MODE] is [ON].

Can switch the electric power of projector lamp. Set 

the lamp power to meet the environment and purpose 

of projection.

The setting will change as follows each time the 

 

z

button is pressed.

Sets the normal lamp intensity.

Sets the reduced lamp intensity.

The [ECO] mode can reduce the power 

 

z

consumption, reduce the operation noise, and 

increase the service life of projector lamp.

The [LAMP POWER] may not drop automatically if:

 

z

You have set the [LAMP POWER] to [NORMAL].

• 

Automatic power drop may fail immediately after 

• 

the lamp is turned on or the [LAMP POWER] is 

set.

Can optimize lamp power and reduce the power 

consumption according to the application.

The [ECO MANAGEMENT] screen is displayed.

 

z

J

[AMBIENT LIGHT DETECTION], 

[SIGNAL DETECTION], and [AV MUTE DETECTION] 

functions can be used.

The setting will change as follows each time the 

 

z

button is pressed.

Adjusts the lamp power according 

to the ambient brightness.

Drops the lamp power when no 

signal is input.

Drops the lamp power in the AV 

Mute mode.

The setting will change as follows each time the 

 

z

button is pressed