Panasonic PT-AX200E User Manual

When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.

You can change the background colour of the menu. 
Press I H to cycle through the option.

 

Semi transparent black

 

Solid blue

 

Semi transparent dark blue

You can change the position where to display the menu. 
Press I H to cycle through the options.

You can choose a screen colour from BLUE or BLACK 
for when the projector is idle. Press I H to select.

You can switch the logo on/off that is displayed when 
starting up the projector. Press I H to select the 
required option. STARTUP LOGO will be displayed for 
30 seconds.

 

Active

 

Deactive

When the projector is turned on, the input terminals are 
detected and an input signal is selected automatically. 
You can switch the system on/off. Press I H to cycle 
through the options.

 

Active

 

Deactive

When an HDMI is not projected normally, you can switch 
the HDMI signal level to NORMAL or EXPAND. Press I 
H to select an option.

 

General HDMI signal level

 

Expanded HDMI signal level

When installing the projector, select the projection 
method according to the projector position. Press I H 
to cycle through the options. See “Projection method” on 
page 15.

Turn off the guidance.

Display the input method by text. The 
INPUT GUIDE will go out after 
5 seconds without any operation.

Display the input method by graphic. The 
INPUT GUIDE will go out after 
10 seconds without any operation.

 

 

• When no signal is detected, the last used input will be 

selected.

• HDMI SIGNAL LEVEL is not available with some 

equipment.

Setting on a desk/floor and 
projecting from front

Mounting in the ceiling and 
projecting from front

Setting on a desk/floor and 
projecting from rear

Mounting in the ceiling and 
projecting from rear