Intel 1000LX User Manual
GB2.book : GB203 13 Tue Oct 27 13:01:06 1998
13
C H A P T E R
3
Configure the module and connect the cables
5
Plug the SC connectors on the optic fiber cable into the RX and
TX sockets, and connect the other end of the cable to a device.
TX sockets, and connect the other end of the cable to a device.
6
Check the LEDs on the 1000Base Module to verify the links.
For more information on LEDs, see Chapter 2.
For more information on LEDs, see Chapter 2.
Cabling to a Matrix
Module in a group of
switches with redundancy
Module in a group of
switches with redundancy
To provide total redundancy for the high-speed link, two 1000Base
Modules are necessary. We recommend that you install these in dif-
ferent switches from the Matrix Modules.
Modules are necessary. We recommend that you install these in dif-
ferent switches from the Matrix Modules.
Note
Redundancy is not possible with the 510T.
1
Connect the Matrix Modules to the Stack Interface Modules in
the primary and secondary switches as described in the Matrix
Module User Guide.
the primary and secondary switches as described in the Matrix
Module User Guide.
2
Plug a Stacking Cable (Intel Order Code: ES500SC) into the
Stack Interface Module connector on the 1000Base Module,
and secure it using the latches on the connector.
Stack Interface Module connector on the 1000Base Module,
and secure it using the latches on the connector.
Matrix Module for 500 Series Switches
4
1
5
2
6
3
Module
Status
Link
Status
Internal Port
1000SX Module for 500 Series Switches
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
Server
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
1000SX Module for 500 Series Switches
1713
Stacking Cable
connected to
the Matrix Module