DELL 9.8(0.0) User Manual
Example
Dell#show ipv6 nd ra-guard policy test
ipv6 nd ra-guard policy test
device-role router
hop-limit maximum 1
match ra ipv6-access-list access
other-config-flag on
router-preference maximum medium
trusted-port
Interfaces :
Te 1/1
Dell#
Related
Commands
Commands
•
— Allows you to configure the RA guard related
commands.
•
— Defines the RA guard policy name and enter the RA
guard policy list configuration mode.
•
•
— Enables the verification of the advertised hop count limit.
•
— Sets the maximum transmission unit (MTU) value.
•
— Enables the verification of the advertised other
configuration parameter.
•
— Sets the advertised reachability time.
•
— Sets the advertised retransmission time.
•
router preference (DRP) value.
•
— Applies the policy to trusted ports.
•
interface.
trusted-port
Allow bypassing the configured RA guard validation and forwards the RA packets received on the
interface, which has the trusted port policy attached.
Syntax
trusted-port
To reset the policy applied to the trusted port, use the no trusted-port
command.
To reset the policy applied to the trusted port, use the no trusted-port
command.
Defaults
none
Command
Modes
Modes
POLICY LIST CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1238
Neighbor Discovery Protocol (NDP)