Genie 3062m3064 User Manual

7

 Beginning with garage door closed is recommended but not necessary.

6.  Press and hold the UP arrow button (+) for two seconds

  or until the long LED comes on blue. (The round LED   

  stays off.)

7.  Release UP arrow button (+) and the round LED will   

  begin flashing blue. (the long LED will go off).

9. Press and release the program/set button—both LEDs  

  flash blue and then go off.

8.  Press and hold the up arrow button (+) to begin opening  

  the garage door. When the garage door is fully opened,   

  release the up button (+). If it has gone too far press

  and release the down button (–) to move the door down

  slightly. The door can be moved up or down with the   

  arrow buttons. Stop the carriage short of the opener   

  powerhead. It is important for the red cord to be clear of  

  the powerhead to allow for manual door operation.

Steady Blue

Flashing 

Blue

Flashing 

Blue