Intermec 2430 User Guide

 

Or:  To set the postamble to an ASCII character string: 

 

Note: To set this command using the bar code labels from the “Full ASCII 
Bar Code Chart” on page 284, you must configure the terminal to use 
Code 39 in Full ASCII mode. For help, see “Code 39” on page 146. 

Scan this bar code: 

  Enter Accumulate Mode / Set Postamble 

 

*+/$+AE* 

 *+/$+AE* 

Scan a value for data from the “Full ASCII Bar Code Chart” on page 
284. The postamble can be from 1 to 25 characters. 

Scan this bar code: 

  Exit Accumulate Mode 

 

*-/* 

 *-/* 

 

Example:  You want to set a postamble that includes quotation marks. Enter the 

postamble by scanning this full ASCII bar code label: 

Set Postamble to “B” 

*/D/KAE/B/B/BB/B/B/B* 

*$+AE"""B"""* 

You must enclose the data within quotation marks and precede each 
quotation mark with another quotation mark so that the quotation marks 
are not treated as the end of the data. 

 

Terminals:  2415, 2425, 2435, 2455, 2475, and 2485/6 with 802.11b radios. 

 

Description:  Determines if power management is enabled for the radio. If you use 

enhanced or standard power management, the radio conserves power by 
sleeping between messages. Using standard power management decreases 
the performance of the RF network, but it increases the life of battery-
powered devices. Using enhanced power management increases the 
performance of the RF network, but it decreases the life of battery-
powered devices.