Xerox Document Workstation with PlotWorks Support & Software User Guide
PlotWorks User Guide • The Scanner Interface • Chapter 9-21
2.
Select which ejection from the scanner is desired; Front, Back, or None from
the Eject combo box. Use this option if you plan to rescan. The image does
not fully leave the scanner until the next image is loaded. Use this option if
you plan to scan multiple images consecutively.
the Eject combo box. Use this option if you plan to rescan. The image does
not fully leave the scanner until the next image is loaded. Use this option if
you plan to scan multiple images consecutively.
Right Edge Scanning
If scanning a nonstandard size document, select the Right Edge Scanning option
to have the software automatically detect the document width.
to have the software automatically detect the document width.
When Right Edge Scanning is selected, load documents to be lined up along the
right edge of the scanner. Documents must be at least 16.5 inches (420 mm) wide
to use this option.
right edge of the scanner. Documents must be at least 16.5 inches (420 mm) wide
to use this option.
1.
Click the Scan Controls tab.
2.
Click the Scan right button (below the Eject combo box).
Reduce or Enlarge an Image
To scale the image to a percent of the original document size:
1.
Click the Scanner Main tab.
2.
Click a button to set a reduction or enlargement value between 25 and 400
percent of the original document size, or enter a percentage in the value field.
percent of the original document size, or enter a percentage in the value field.
This option is not available for all scanners.
Invert Images
The Scanner Interface allows you to invert the colors in your scanned images. This
causes the white portions of the document to become black in the scanned image,
and vice versa.
causes the white portions of the document to become black in the scanned image,
and vice versa.
To invert a scan:
1.
Click the Scan Controls tab.
2.
Click the Invert button (below the Image label for most scanners).
Mirror Image
To mirror an image:
1.
Click the Scan Controls tab.
2.
Click the Mirror button (below the Image label for most scanners).
Set the Document Size
Before scanning a document, you must enter its size into the Scanner Interface. Or,
you can set the Scanner Interface to detect the document size automatically.
you can set the Scanner Interface to detect the document size automatically.