The printer automatically adjusts the color registration when automatic adjustment is enabled. You
can manually adjust color registration any time the printer is idle. Always adjust the color registration
when the printer is moved. If you are having printing problems, adjust the color registration. For details,
see

Print-Quality Problems

on page 43.

Performing Color Registration With the Printer Setting Utility

Note:

The Color Registration procedures for the Printer Setting Utility work with USB or network

connected Phaser 6000 and Phaser 6010 printers.

Enabling/Disabling Automatic Color Registration

Use the following procedure to enable or disable the automatic color registration adjustment feature.

1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser 6000/6010 >

Printer Setting Utility.

2. Click the Printer Maintenance tab, then select Color Registration Adjustment from the list.

3. Do one of the following:

•

To enable the feature, click to select On for Automatic Registration Adjustment.

•

To disable the feature, click to clear the check for Automatic Registration Adjustment.

4. Click the Apply New Settings button to accept the change.

Performing an Automatic Color Registration Adjustment

Use the following procedure to perform the automatic color registration adjustment.

Note:

An automatic color registration adjustment is performed every time a new toner cartridge is

installed.

1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser 6000/6010 >

Printer Setting Utility.

2. Click the Printer Maintenance tab, then select Color Registration Adjustment from the list.

3. Click the Start button next to Auto Correct. The Automatic Color Registration routine runs.