Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook                                                                                                                   152 

external Finishers.  
 
NOTE: Only one external Finisher can be active at a time. 

4.  If there are no Finishers enabled and on-line, continue with steps 5-9. If there 

is a Finisher enabled (denoted by a check mark in the Enable column to the 
right of the Finisher name) that you do not wish to use and you need to 
enable a different Finisher, perform steps 10-16.  

5.  Select the [Profile Setup] tab.  
6.  To on-line the Finisher you want to use, highlight the Finisher and select [On-

line]. An check mark will be displayed in the On-line column.  

7.  Select the [On-line Finishers] tab.  
8.  Highlight the Finisher you want to enable and select [Enable]. A check mark 

will be displayed in the Enabled column.  

9.  Select [Close] in the lower, left corner of the Finishing window.  
10. Highlight the Finisher that you do not want to use and select [Disable]. An X 

will be displayed in the Enabled column when the Finisher is disabled.  

11. Select the [Profile Setup] tab in the Finishing window.  
12. Highlight the Finisher that you do not want to use and select [Off-line]. An X 

will be displayed in the On-line column when the Finisher is off-line.  

13. To on-line the Finisher you want to use, highlight the Finisher and select [On-

line]. A check mark will be displayed in the On-line column.  

14. Select the [On-line Finishers] tab.  
15. Highlight the Finisher you want to enable and select [Enable]. A check mark 

will be displayed in the Enabled column.  

16. Select [Close] in the lower, left corner of the Finishing window.