Xerox ColorQube 9201/9202/9203 Administrator's Guide
Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
65
6.
Touch [TCP/IP Enablement].
a.
Touch [Enable] for IPv4 and IPv6.
b.
Touch [Save].
7.
Touch [Dynamic Addressing].
a.
Touch [Disabled] to disable DHCP.
b.
Touch [Save].
8.
Touch [IP Address/Host Name].
a.
Touch button under the [IPv4 Address] heading.
b.
Enter the IP Address using the on-screen keypad and touch [Save].
c.
Touch button under the [Host Name].
d.
Type the host name EXACTLY as you want it to appear. To access more characters, touch
[123] on the user interface.
[123] on the user interface.
e.
Touch [Save], then touch [Close].
9.
Touch [Subnet and Gateway].
a.
Touch [Subnet Mask], enter the Subnet Mask address using the on-screen keypad.
b.
Touch [Save].
c.
Repeat this process for the IP Gateway. When you are finished, touch [Save] to accept the
changes and return to the TCP/IP Settings screen.
changes and return to the TCP/IP Settings screen.
d.
Touch [Close] twice to return to the feature menu.
10. Touch [Advanced Settings].
11. Touch [Continue].
12. Touch [HTTP Settings].
a.
Ensure Enable is selected. If not, touch [Enable].
b.
Touch [Save], then touch [Close] twice to return to the Tools menu.
DNS/DDNS Configuration
1.
From the Tools menu,
2.
Touch [Network Settings].
3.
Touch [TCP/IP Settings].
4.
Touch [DNS Configuration]. This feature will be inaccessible (grayed out) if TCP/IP protocol is not
enabled.
enabled.
a.
Touch the [Domain Name] button.
b.
Touch the button under Domain Name.
c.
Touch the [Clear Text] button to remove the default name before entering the new name
using the on screen keyboard.
using the on screen keyboard.
d.
Touch [Save].
e.
Touch [Close].
5.
Touch [Preferred DNS Server].
a.
Touch the button under Preferred DNS Server #1, enter the DNS Server IP Address using the
on-screen keypad.
on-screen keypad.
b.
Touch [Save], then touch [Close].