Xerox ColorQube 9201/9202/9203 Administrator's Guide
Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
System Administrator Guide
64
TCP/IP Settings
This section explains how to set up the device to operate in a Windows TCP/IP environment. The
following information is provided:
following information is provided:
•
•
•
•
•
•
•
•
•
•
The device supports IP versions 4 and 6. IPv6 can be used instead of or in addition to IPv4.
IPv4 Settings can be configured directly at the device user interface, or remotely, via a web browser
using Internet Services. IPv6 can only be configured using Internet Services. To configure TCP/IP
Settings using Internet Services, see
using Internet Services. IPv6 can only be configured using Internet Services. To configure TCP/IP
Settings using Internet Services, see
Configure Static Addressing using the Device
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
•
Existing operational network utilizing the TCP/IP protocol.
•
Ensure that the device is connected to the network.
•
Static IP Address for the device.
•
Subnet Mask Address for the device.
•
Gateway Address for the device.
•
Host Name for the device.
Enter a Static IP Address
1.
At the device and press the <Log In/Out> button to enter the Tools pathway.
2.
Enter the Administrator’s User Name [admin], touch [Next], enter Password [1111], touch
[Enter].
[Enter].
3.
Press the <Machine Status> button, and then the [Tools] tab.
4.
Touch [Network Settings].
5.
Touch [TCP/IP Settings].