Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-33
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Figure 4-35 span Command Menu
Step 3
Type
2
and press Enter to modify a span record.
appears.
Figure 4-36 span Record Selection
Step 4
Type the number of the span record that needs to be modified and press Enter. In this example, span
record 0 is being configured so type
record 0 is being configured so type
0
and press Enter. The first five lines of
appear.
Figure 4-37 span Record Configuration
Step 5
Enter values as indicated by
. Press Enter after you enter each value and the next
line appears.
If you exceed the number of ports configured by the factory, an error message appears.
meetingplace:tech$ span
MeetingPlace is up
***** S P A N C O N F I G M E N U *****
1) View DTI span record(s)
2) Modify DTI span record
x) Exit program
Enter command:
Enter command: 2
Enter DTI span record number [0..47] : 0
Enter command: 2
Enter DTI span record number [0..47] : 0
------------- UNIT 0 SPAN 0 --------------
--- To skip over a field, just press <cr> ---
Activate the DTI span? [y] :
Framing [ESF] :
Zero code suppression [ B8ZS] :
Timing [external] :
External sync priority [ 1] :
Trunk [ 1] [port 0] :
Trunk [ 2] [port 1] :
Trunk [ 3] [port 2] :
Trunk [22] [port 21] :
Trunk [23] [port 22] :
Trunk [24] [port 23] :
Remote loopback to network? [n] :
Internal data loopback? [n] :
Enter command: