Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-36
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Step 5
.
Figure 4-40 blade Confirmation for 736 T1 PRI Ports
Step 6
Type
x
and press Enter to exit the “blade” command utility.
368 T1 PRI ports
This section explains how to use the “blade” command when configuring 368 T1 PRI ports.
Step 1
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see the
logging, see the
Step 2
At the tech$ prompt, type
blade -p 368
and press Enter.
Step 3
Confirm the “blade” command you entered and type
y
and press Enter. If you entered the wrong
command, type
n
and press Enter, then re-enter the correct command.
The server responds by telling you how many ports it is configuring. When the tech$ prompt appears, it
is complete. See
is complete. See
.
meetingplace:tech$ blade
Slot Card Type CardId Ports
1 TP1610 T1 0 0-22, 23-45, 46-68, 69-91,
92-114, 115-137, 138-160, 161-183
184-206, 207-229, 230-252, 253-275,
276-298, 299-321, 322-344, 345-367
2 TP1610 T1 1 377-399, 400-422, 423-445, 446-468,
467-489, 490-512, 513-535, 536-558
559-581, 582-604, 605-627, 628-650
651-673, 674-696, 697-719, 720-736
3 CG6000C SB 2
4 CG6000C SB 3
5 CG6000C SB 4
6 CG6000C SB 5
11 CG6000C SB 6
12 CG6000C SB 7
13 CG6000C SB 8
14 CG6000C SB 9
15 no card
16 no card
***** B L A D E C O N F I G M E N U *****
1) View blade details
2) Modify blade
x) Exit program