Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
5-9
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 5 Repairing and Maintaining the 8112 Server
Replacing a disk drive
Figure 5-7
Removing a Disk Drive
Installing a new disk drive
Step 1
Ensure the system is powered down. If you are installing a new disk drive immediately after removing
an old one, the system should still be powered down. Otherwise, follow the steps in
an old one, the system should still be powered down. Otherwise, follow the steps in
Step 2
Slide the new disk drive straight into the empty drive bay. You hear a click when it is completely in.
Step 3
Secure the disk drive by pushing the keyswitch in and turning it clockwise for a quarter of a turn. This
latches the disk drive and carrier into the frame.
latches the disk drive and carrier into the frame.
Step 4
Attach the power cable to the back of the server.
Step 5
Power up the server. Refer to
Step 6
Test that the disk drive is correctly installed. See the
for
more information.