Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
7-11
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 7 Installing a Shadow Server
Configuring the shadow server while in standalone mode
Step 3
Verify the main telephone number and any other applicable parameters. Change them as needed.
Depending on the configuration, these values may be the same or different from the primary server’s
values.
Depending on the configuration, these values may be the same or different from the primary server’s
values.
Step 4
Click
Save Changes
in the bottom right corner.
Step 5
Click
Server Configuration
in the left pane.
Step 6
Click
Query
and values appear in the right pane.
Step 7
Verify that all values are accurate.
Step 8
Verify the
Max Recording Space (min.)
field is set appropriately for the current configuration.
Languages confirmation
Verify that all languages installed on the primary server are also installed on the shadow server.
Gateway routing
How you configure the gateway routing depends if you have a set of backup gateway machines.
•
With a set of backup gateway machines. The gateways must be installed and connected before
bringing the shadow server online configured as a shadow server. The backup gateways need to be
set up and connected while the shadow server is in standalone server mode. Refer to the appropriate
MeetingPlace Audio Server 5.2 System Manager’s Guide for gateway installation procedures.
bringing the shadow server online configured as a shadow server. The backup gateways need to be
set up and connected while the shadow server is in standalone server mode. Refer to the appropriate
MeetingPlace Audio Server 5.2 System Manager’s Guide for gateway installation procedures.
When the system is converted to a shadow server, the gateways are down attempting to connect to
the server. Once the shadow server is brought into service as the primary server, the gateways
reconnect.
the server. Once the shadow server is brought into service as the primary server, the gateways
reconnect.
•
Without a set of backup gateway machines. The customer must correctly configure his network such
that if the primary server goes down, the TCP requests are re-routed to the shadow server.
that if the primary server goes down, the TCP requests are re-routed to the shadow server.
Other considerations
•
FlexMenus. If the primary server is configured with FlexMenus, the shadow server must also be
configured with FlexMenus before converting the system to a shadow server.
configured with FlexMenus before converting the system to a shadow server.
•
Custom prompts. If the primary server is configured with custom prompts, the shadow server must
also be configured with custom prompts before converting the system to a shadow server.
also be configured with custom prompts before converting the system to a shadow server.
•
Translation tables. The translation tables for the primary server are not replicated. You need to
configure the translation table on the shadow server to match the primary server as needed. However,
the translation tables may be different, especially if the shadow server is in a different location.
configure the translation table on the shadow server to match the primary server as needed. However,
the translation tables may be different, especially if the shadow server is in a different location.