Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
7-13
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 7 Installing a Shadow Server
Changing the shadow server to act as a shadow server
Figure 7-7
setup Command for the Shadow Server
Step 6
Type
5
and press Enter to select shadow network server.
Step 7
The system prompts you to enter the server’s host name. Be sure to enter the proper Internet host name
with no spaces, not the IP address.
with no spaces, not the IP address.
Step 8
Continue following the prompts to enter the other necessary information.
Note
At the end of the setup, you see an indication that the site class is “REMOTE” as in
This is always the case, even if the shadow server is located at the same site as the primary server.
Step 9
Type
y
and press Enter to update the initialization file as in line four of
.
Figure 7-8
Setting the Shadow Server’s Class
Step 10
At the tech$ prompt, type
restart enable
and press Enter to bring the server back up.
meetingplace:tech$ setup
This program determines the basic personality of this unit.
Current unit class = SINGLE
Current site class = LOCAL
Select the unit class:
1) MeetingPlace -- Standalone (SINGLE).
5) Shadow Network Server (SHADOW).
99) Quit.
Select: 5
You will now be prompted for host name and IP address of the primary
server.
This information is used to establish the network connection. Please,
when prompted for a host name, enter a proper Internet host name, with
no spaces or funny characters, not the IP address.
Host name of the primary server []:
You have selected a new configuration for this unit.
Unit class = SHADOW
Site class = REMOTE
Update the initialization file (y/[n])? y
DONE
NOTE: Changes take effect with the next restart of the unit.
Unit class = SHADOW/REMOTE