Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
Cisco MeetingServer 5.1 System Manager’s Guide
139
Cisco Systems
March 2003
To initiate a system shutdown:
1.
In the System tab, select System Shutdown.
Figure 0-4 System Shutdown Tab
2.
In the Shutdown form, select the Type field. To shutdown the
MeetingPlace system, choose Full Shutdown.
MeetingPlace system, choose Full Shutdown.
3.
The Server field is read-only for standalone MeetingPlace systems.
4.
Select the When field.
•
To shutdown the system immediately, choose Immediate.
•
If you have time to notify your users, choose Courtesy. You can use
the courtesy period to notify your users of the shutdown (if you
haven’t done so already).
the courtesy period to notify your users of the shutdown (if you
haven’t done so already).
5.
In the Delay field enter the number of minutes until the shutdown
begins. During the delay period, users are asked to hang up before
MeetingPlace is shut down. Logging on to MeetingTime during the
courtesy period is not permitted.
begins. During the delay period, users are asked to hang up before
MeetingPlace is shut down. Logging on to MeetingTime during the
courtesy period is not permitted.
When the delay period is over, all users are disconnected from the
system.
system.
6.
To begin the shutdown, select Execute.
Starting MeetingPlace
Starting MeetingPlace should be done only under the guidance of your
MeetingPlace support representative.
MeetingPlace support representative.