Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
Cisco MeetingServer 5.1 System Manager’s Guide
140
Cisco Systems
March 2003
Turning on the MeetingPlace System
To turn on the MeetingPlace system move the server power switch in the
back of the system chassis to the “On”, 1 position. Allow up to 10 minutes
for the server to initialize.
back of the system chassis to the “On”, 1 position. Allow up to 10 minutes
for the server to initialize.
Figure 0-5 Back of MeetingPlace M3 System
WARNING: If the system is shut down in a disorderly manner,
such as the result of a power failure, the restart time may be
longer, depending on the number of disks used by your system.
such as the result of a power failure, the restart time may be
longer, depending on the number of disks used by your system.
The system generates an alarm after the power failure. The
alarm should be cleared if the system appears to be running
normally. If the system fails to recover or behaves
inappropriately following a power failure, contact your
MeetingPlace support representative. Do not attempt to reboot
your MeetingPlace server or Windows NT gateway machine(s).
alarm should be cleared if the system appears to be running
normally. If the system fails to recover or behaves
inappropriately following a power failure, contact your
MeetingPlace support representative. Do not attempt to reboot
your MeetingPlace server or Windows NT gateway machine(s).